|
|
|
|
“Golden grassplot brand ”Organic polymeric flocculant is a series of white water soluble granule polymers.In their molecular chain,there are lots of cationic,anionic and neutral groups with strong absorptive capacity.These groups will neutralize the electric charges on the surface of the suspending and colloid particles in ghe water and destabilize the colloid.By the absorptive abridging ability of the organic polymeric flocculants,theneutralized and destabilized colloid particles combine with the polymer and with each other to form and groe into big flocs and then deposit,and the solid things are removed from the water.Thest organic polymeric flocculants are widely used in the purification and treatment of living water and industrial water,such as the original water,sewage,industrial waste water,and mud water.
The features of the 'Liangjiang brand 'Organic Polymeric Flocculants:
1.A series of various products are offered,such as the positive-ionic,negative-ionic,non-ionicand amphoteric ionic organic polymeric flocculants,to meet with the treatments of various kinds of waters.
2.They can be used in water with PH value of wide range.The dosage is low,at about 0.1-10ppm(0.1-10mg/L).
3.When is applied with inorganic flocculants together,excellent results may get in the separation of mud and the water.
4.After the treatment,the treated water is good in clarity.
5.Good in water solubility and easily dissolved in cool water.
Instruction for Use:
1.The concentration of the working solution:Generally,the working solution concentration fo anionic and non-ionic flocculants is 0.1%(w/w),and of cationic is 0.2%(w/w),The working solution should be used within the day it is prepared.
2.The hydraulic condition of dissolving:Stirring at about 200 rpm for 60 minutes.It will be benefit for use to let the solution stand still for 30 to 60 minutes for ripening after the stirring.
3.During preparation to the working solution,the flocculant powder should be added solwly and evenly to the water with stirring at 200 rpm,ensuring the dissolving of the materials,avoiding the fish-eye like agglomeration of the powder.
4.The dissolving should be in an anti-corrosive container.The tap-water is suitable for use.(For cationic flocculants,it is better that the PH of the water is lower than 6.5.)
5.If the water is at about 30℃,the materials will dissolve much quickly.
6.The work area for solution preparing should be washed frequently and kept clean,to avoid slipping,falling and accidents.
Package and Storage:
25KG/bag with plastic inner and paper outer.
It should be stored in dry and ventilated warehouse.Its storage life is 1 year with undamaged package. |
|
|
